1-866-935-6764

Whether you're adding heat treatment to your service line or replacing ineffective heaters, THERMOCLAVE Heaters are your best solution.

heat kills bugs

THERMOCLAVE heaters are:

  • Profitable - lower package and operating costs help you keep your treatment pricing competitive

  • Easy to Set-up and Use - fewer pieces of equipment are needed to treat a defined space

  • Smaller and lighter - easier to transport

  • Quicker - a constant discharge air temperature is maintained which equals faster treatment times resulting in fewer hours to complete a job

  • Energy Efficient - temperature regulation uses less power lowering your operating costs

Heat is a proven method for pest eradication. It's most effective when the target temperature is achieved and maintained quickly and efficiently. THERMOCLAVE Heaters do just that.

We offer the standard packages described below but recognize that every business is unique. If what you see doesn't seem to match what you're looking for -- Call Us! We'll listen and work with you to put together the right equipment that meets your needs.

THERMOCLAVE LTM 9 Package

THERMOCLAVE LTM 9 Package

Ideal for treatment areas up to 300 sq. ft. - hotel rooms, motel rooms, dorm rooms, self-storage units, pods, and larger vehicles such as transit buses and larger panel trucks.

killing bed bugs with high heat
  • 1 - THERMOCLAVE LTM 9 Electric Heater

  • 1 - 50' 8/3 50A Extension Cable

  • 2 - 16" 3,000 CFM 120V Hi Temp Distribution Fans

  • 1 - Wireless Temperature Transmitter
  • Heat controlled by a solid state relay.
  • Thermal overload protection.
  • High-quality tube axial fan with ball bearings for lowest noise and longest life.
  • Corrosion resistant, galvanized steel enclosure.
  • Discharge air duct.
  • NEMA style 6 - 50P Plug.
  • Dual discharge air temperature 125° F / 155° F set point.
  • Built-in electronic temperature controller and sensor proportionally modulates the heating load to match the exact capacity required for energy efficient operation.
  • Temperature sensor controls the heater proportionally to maintain the pre-set air discharge temperature.
  • Open coil elements made of the highest grade nickel-chrome resistance wire will not age or oxidize, thus assuring longer heater life.

Heater Specifications:

Capacity Maximum Output (BTU/Hr) Maximum Temperature Output Maximum Air Flow (CFM) Voltage AMP Rating Overall Dimensions
(L x W x H)
Weight (lbs.)
9 kW 30,717 155° F 300 208/240V Single Phase* 37.5 28.5" x 15" x 16.75"
(incl. 1.75" handles)
54
bed bugs*Three Power Circuit model also available

Fan Specifications:

Air Flow (CFM) Speed (RPM) Voltage Noise Level (dB) Dimensions
(L x W x H)
3,000 - 3,250 1,160 120V 50 21.3" x 20.7" x 18.1"

THERMOCLAVE LTM 9 Stand-alone

THERMOCLAVE LTM 9

Ideal for treatment areas up to 300 sq. ft. - hotel rooms, motel rooms, dorm rooms, self-storage units, pods, and larger vehicles such as transit buses and larger panel trucks.

  • Heat controlled by a solid state relay.LTM9 Heater kills bed bugs
  • Thermal overload protection.
  • High-quality tube axial fan with ball bearings for lowest noise and longest life.
  • Corrosion resistant, galvanized steel enclosure.
  • Discharge air duct.
  • NEMA style 6 - 50P Plug.
  • Dual discharge air temperature 125° F / 155° F set point.
  • Built-in electronic temperature controller and sensor proportionally modulates the heating load to match the exact capacity required for energy efficient operation.
  • Temperature sensor controls the heater proportionally to maintain the pre-set air discharge temperature.
  • Open coil elements made of the highest grade nickel-chrome resistance wire will not age or oxidize, thus assuring longer heater life.

Heater Specifications:

Capacity Maximum Output (BTU/Hr) Maximum Temperature Output Maximum Air Flow (CFM) Voltage AMP Rating Overall Dimensions
(L x W x H)
Weight
(lbs.)
9 kW 30,717 155° F 300 208/240V
Single Phase*
37.5 28.5" x 15" x 16.75"
(incl. 1.75" handles)
54
bed bugs*Three Power Circuit model also available.

THERMOCLAVE LTM 20

THERMOCLAVE LTM 20

Ideal for treatment areas up to 400 - 600 sq. ft. - residential spaces, small commercial spaces, larger hotel rooms and motel rooms.

    high heat kills bed bugs
  • Heat controlled by a solid state relay.
  • Thermal overload protection.
  • High quality tube axial fan with ball bearings for lowest noise and longest life.
  • Corrosion resistant galvanized steel enclosure.
  • 50 amp twist lock electrical connection.
  • Dual discharge air temperature 125° F / 155° F set point.
  • Built-in electronic temperature controller and sensor proportionally modulates the heating load to match the exact capacity required for energy efficient operation.
  • Temperature sensor controls the heater proportionally to maintain the pre-set air discharge temperature.
  • Open coil elements made of the highest grade nickel-chrome resistance wire will not age or oxidize, thus assuring longer heater life.

Heater Specifications:

Capacity Maximum Output (BTU/Hr) Maximum Temperature Output Maximum Air Flow (CFM) Voltage AMP Rating Overall Dimensions
(L x W x H)
Weight (lbs.)
20 kW 61,400 155° F 1,200 480V
3 Phase
24.06 44" x 24" x 27" 146

GET A QUOTE

THERMOCLAVE, LTM and PEACH are registered trademarks of On Site Manufacturing, Inc.